Building A Campfire :: essays research papers

     There are many different camp recruit structures that can be built to start a kindling whilecamping. The most earthy are the teepee, log cabin, dugout, and tunnel structures. Almost anyone can build these fires if he or she follows some key points.      A fire inevitably iii elements air, fuel, and an ignition of some kind. For a campfirethe air element is easily reachable its the air a person breaths or oxygen. Fuel isequivalent to wood. sometimes lighter fluid is used to start big fires immediately, butnormally when dealing with a campfire the fuel is wood. Ignition can come from a spark,match, or lighter. It is anything that initially starts the fire.     Going deeper into wood, there are three categories to bar it under. Kindling isthe stuff that is easiest to burn. It could be leaves, dryer lint, or very nice twigs. Thenext surface of wood is sticks and small logs. These will range in size from one half i nch totwo inches in diameter. Anything larger than this is classified as the fuel. The fuel is thebig logs that will burn for hours. When a fire is started it needs to be built like this liberation first, consequently sticks and small logs, and thence the fuel, once the fire is going good. Using this proficiency with the following fire structures will ensure hot easy fires.     The teepee style structure is probably the most used and easiest to build, butdoesnt ineluctably result in the hottest or longest fervent campfire. To build this firethink about the name "teepee." The end result before burning this structure looks like anIndians teepee (If the teepee shape is not familiar, then envision a conic shape). Start byplacing the intermediate size wood or sticks in the ground in a posting shape about eightto twelve inches in diameter, leaning the tips of the sticks unitedly in the center. Thesticks should already start to resemble a teepee shape. r est layering the walls of theteepee with more sticks, but not too thick, because air needs to be able to pass through thewalls easily. Leave a crush on one side large enough to place punk rocker intimate the stick walls. This hole is also left to light the kindling from the inside and may be filled in once the fireis lit.      Once this is completed, the structure should be a recognizable teepee or coneshape. The kindling should be lit on the underside inside the teepee walls through the hole